DEVKIT kamere

Image Size

MEGA, CMOS 1280 x 960 Color, Sensitivity: 1 lux (t = 1/60 sec) / 0.05 lux (t = 1/1 sec),
Image Formats: 1280x960, 640x480, 320x240, 160x120 pixels, customer defined

Lenses

55° wide-angle(45° x 35°); f = 8 mm (equiv. ~43 mm on 35 mm systems), in 10 m (33'): ca. 8.3 x 6.2 m (27'2" x 20'3")
19° tele (15° x 11°); f = 25 mm (equiv. ~135 mm on 35 mm systems), in 10 m (33'): ca. 2.7 x 2.0 m (8'9" x 6'6")
100° Super wide-angle (86° x 70°); f = 3.6 mm (equiv. ~20 mm on 35 mm systems), in 10 m (33'): ca. 18.5 x 13.9 m (60'7" x 45'6")

Interfaces

10BaseT Ethernet (RJ45), ISDN S0 (RJ45), RS232 (D-Sub9 plug)

Sensors

Video Motion detector, Exposure Zones, PIR Motion detector, Loudspeaker and microphone, 24V Signal Input/Output

Functions

Web Server, FTP client, E-Mail, ISDN PPP server/client, Multi View, Recorder/Player, Softbuttons, RS232 Data Logger, RS232 Web Terminal, IP Notify (Send, Receive) for ext. management systems, ISDN/IP Telephony, IP Speech, PDA screens, MxPEG Live, Logo generator, Privacy zones, Software zoom (2x, 4x), no software installation required

Image Storage

64 MB internal image/event storage (~4,000 images 320x240, good quality); Storage event- or time-controlled: internal or on web server using FTP or on PC/server on the network (Windows/Linux NFS), Single image recording (pre-/post-alarm images: 10), Video/audio recording (25fps CIF), Video/audio recording (Event), Video/audio recording (scheduled), direct access to images, hence no FTP required (but possible)

Options

Power supply (only if power is not supplied using ISDN S0 bus),
Power over Ethernet: Network Power Adapter (MX-NPA-3-RJ), CS-Mount-Adapter (MX-M10-DevKit-CS),
Other lenses and flat cables: see Lens Options list

Dimensions

Main board: 123 x 115mm (4" x 4");

Delivered parts

M10 main board incl. audio module and Secure firmware for connecting up to 2 camera modules using flat cable,without casing (for hidden installations), flat cable, lenses and lens mounts not included indelivery (see Special Options Part II camera list)

Information

CE test has to be completed by installer after finishing the installation!

Warranty

12 months